Reference Guide

848 | show dot1x ap-table Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
show dot1x ap-table
show dot1x ap-table
Description
Shows the 802.1x AP table.
Syntax
No parameters.
Example
Issue this command to display details from the AP table.
The output of this command includes the following parameters:
Command History
This command was introduced in ArubaOS 3.0.
Command Information
A
P Table
-
-------
M
AC IP Essid Type AP name Vlan Enc Stations Forwarding-
M
ode Profile Acl
-
-- -- ----- ---- ------- ---- --- -------- ---------
-
----- ------- ---
0
0:1a:1e:87:ff:c0 10.3.9.242 AP 00:1a:1e:c0:7f:fc 0 - 0
Parameter Description
MAC The MAC address of the AP
IP The IP address of the AP
Essid The AP’s ESSID
Type Device type
AP name Name of the AP
Vlan Number of VLANs associated with the specified AP
Enc AP’s encryption method
Stations Number of stations associated with the specified AP
Forwarding Mode Forwarding mode used by the specified AP
Profile AP profile
Acl Number of ACLs this AP belongs to
Platforms Licensing Command Mode
All platforms Base operating system Enable or config mode on master controllers