Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide show esi groups | 861
show esi groups
show esi groups [{group-name <groupname>|{ping-name <ping-name>}]
Description
Show ESI group information.
Syntax
Usage Guidelines
The ESI parser is a mechanism for interpreting syslog messages from third party appliances such as anti-virus
gateways. Use this command to view configured ESI server groups.
Example
This example below displays the name of each configured ESI group, including its ping definitions and ESI
server.
Related Commands
Command History
This command was introduced in ArubaOS 2.5.
Command Information
Parameter Description
group-name <groupname> View the facility used when logging messages into the remote syslog server.
ping-name <ping-name> Enter the name of a set of ping values to how the names of ESI groups using that set of ping
attributes. Define a set of ESI ping values using the command esi ping.
server Show the IP address of a remote logging server.
Platforms Licensing Command Mode
esi group This command configures an ESI group. Config mode on master or local controllers.
esi ping This command specifies the ESI ping health check
configuration.
Config mode on master or local controllers.
esi server This command configures an ESI server. Config mode on master or local controllers.
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on master or local controllers.
(host) #show esi groups
ESI Group Table
---------------
Name Tunnel ID Ping Flags Servers
---- --------- ---- ----- -------
anything 0x1042 pingset_1 C 0
cupertino 0x1043 - C 0
Flags:
C:Datapath Download complete