Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide show ids unauthorized-device-profile | 905
Related Commands
Configure the Unauthorized Device profile using the command ids unauthorized-device-profile.
Wireless Bridge
detection Quiet Time
Time, in seconds, that must elapse after a wireless
bridge alarm has been triggered before another identical
alarm may be triggered.
Rogue AP Classification Shows if the profile has enabled or disabled rogue AP classification.
Overlay Rogue AP
Classification
Shows if the controller allows APs that are plugged into the wired side of the network to be
classified as “suspected rogue” instead of “rogue”.
Valid Wired MACs List of valid and protected SSIDs.
Allow Well Known MAC Shows if the profile allows devices with known MAC addresses to classify
rogue APs.
Rogue Containment Shows if the controller will automatically shut down rogue APs.
Suspected Rogue
Containment
Shows if the controller will automatically treat suspected rogue APs as interfering APs.
Suspected Rogue
Containment Confidence
Level
Confidence level of suspected Rogue AP to trigger containment, expressed as a
percentage.
Protect Valid Stations Shows if the controller will allow valid stations to connect to a non-valid AP.
Detect Bad WEP Shows if the profile has enabled or disabled detection of WEP initialization vectors that are
known to be weak and/or repeating.
Detect Misconfigured AP Shows if the profile has enabled or disabled detection of misconfigured APs.
Protect Misconfigured
AP
Shows if the profile has enabled or disabled protection of misconfigured APs.
Detect Valid SSID
Misuse
Shows if the detect valid SSID minuse is enabled (true) or disabled (false)
Protect SSID Shows if the profile has enabled or disabled use of SSID by valid APs only.
Privacy Shows if the profile has enabled or disabled encryption as a valid AP configuration.
Require WPA Shows if the controller will flag any valid AP not using WPA as a misconfigured AP.
Valid 802.11g channel
for policy enforcement
A list of valid 802.1b/g channels that third-party APs are allowed to use.
Valid 802.11a channel
for policy enforcement
A list of valid 802.11a channels that third-party APs are allowed to use.
Valid MAC OUIs A list of valid MAC Organizationally Unique Identifiers (OUIs).
Valid and Protected
SSIDs
A list of valid and protected SSIDs.
Protect 802.11n High
Throughput Devices
Shows if the profile enables or disables protection of high-throughput (802.11n) devices.
Protect 40MHz 802.11n
High Throughput Devices
Shows if the profile enables or disables protection of high-throughput (802.11n) devices
operating in 40 MHz mode.
Detect Active 802.11n
Greenfield Mode
Shows if the profile enables or disables detection of high-throughput devices advertising
greenfield preamble capability.
Parameter Description