Reference Guide

Table Of Contents
Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide show ip radius | 949
show ip radius
show ip radius nas-ip|source-interface
Description
Display global parameters for configured RADIUS servers.
Syntax
Examples
The example below shows the RADIUS client NAS IP address.
Related Commands
Command History
Introduced in ArubaOS 3.0.
Command Information
Command Description
nas-ip Show the Network Access Server (NAS) IP address attribute sent in outgoing RADIUS
requests
source-interface Show the source address of outgoing RADIUS requests
Command Description
ip radius This command configures global parameters for configured RADIUS servers.
Platforms Licensing Command Mode
All platforms Base operating system Available in Config or Enable mode on master or
local controllers
(host) #show ip radius nas-ip
RADIUS client NAS IP address = 10.168.254.221