Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide show ipc statistics app-ap | 951
show ipc statistics app-ap
show ipc statistics app-ap {am|sapd|sta} {ap-name <ap-name>}|{bssid <bssid>}|{ip-addr
<ip-addr>}
Description
Display Inter Process Communication (IPC) statistics for a specific AP or BSSID.
Syntax
Usage Guidelines
Issue this command at the request of Dell support to troubleshoot application errors.
Example
The following example shows IPC statistics for the SAPD process on an AP named mpp125.
The output of this command includes the following data columns:
Parameter Description
am Show IPC statistics for an air monitor.
sapd Show IPC statistics for the SAPD process.
stm Show IPC statistics for station management communications.
ap-name <ap-name> Show IPC statistics for an AP with a specific name.
bssid <bssid> Show IPC statistics for a specific Basic Service Set Identifier (BSSID). An AP’s BSSID is
usually the AP’s MAC address.
ip-addr <ip-addr> Show IPC statistics for an AP with a specific IP address. Enter the IP address in dotted-
decimal format.
Parameter Description
Tx Msg Number of transmitted messages.
Tx Blk Number of blocking messages transmitted.
Tx Ret Number of transmitted messages that were returned.
Tx Fail Number of failure messages that were transmitted.
Rx Ack Number of received acknowledgements.
(host) #show ipc statistics app-ap sapd ap-name mpp125
Local Statistics
To application Tx Msg Tx Blk Tx Ret Tx Fail Rx Ack Rx Msg Rx Drop Rx Err Tx Ack
MESH 3 0 1 0 3 1 1 0 1
RF Client 1 0 0 0 1 1 0 0 1
STM 1 0 0 0 1 0 0 0 0
Nanny 1 0 0 0 1 0 0 0 0
Remote Statistics
To application Tx Msg Tx Blk Tx Ret Tx Fail Rx Ack Rx Msg Rx Drop Rx Err Tx Ack
AMAPI CLI Client 0 0 0 0 0 1 0 0 1
STM 248 0 0 0 0 248 0 0 0
Allocated Buffers 0
Static Buffers 1
Static Buffer Size 1444