Users Guide

228 | Secure Enterprise Mesh Dell PowerConnect ArubaOS 5.0 | [User Guide
Selecting a Mesh Radio Profile
Use the following procedure to select a mesh radio profile for a remote mesh AP or AP group:
1. Navigate to the Configuration > Wireless > AP Configuration window. Select either the AP Group or AP
Specific tab.
z If you selected AP Group, click the Edit button by the AP group to which you want to assign a new mesh
radio profile.
z If you selected AP Specific, click the Edit button by the AP to which you want to assign a new mesh radio
profile.
2. Under the Profiles list, expand the Mesh menu, then select Mesh radio profile.
3. In the Profile Details window pane, click the Mesh radio profile drop-down list and select the desired mesh
radio profile from the list.
4. Click Apply. The profile name appears in the Mesh Radio Profile list with your configured settings. If you
configure this for the AP group, this profile also becomes the selected radio profile used by the mesh portal for
your mesh network.
Selecting an RF Management Profile
Use the following procedure to select an RF management profile for a remote mesh AP or AP group:
1. Navigate to the Configuration > Wireless > AP Configuration window. Select either the AP Group or AP
Specific tab.
z If you selected AP Group, click the Edit button by the AP group name to which you want to assign a new
802.11a or 802.11g RF management profile.
z If you selected AP Specific, click the Edit button by the AP to which you want to assign a new 802.11a or
802.11g RF management profile
2. Under the Profiles list, expand the RF management menu.
3. To select a 802.11a radio profile for an AP or AP group, click 802.11a radio profile. In the Profile Details
window pane, click the 802.11a radio profile drop-down list and select the desired profile from the list
-or-
To select a 802.11g radio profile for an AP or AP group, click 802.11g radio profile. In the Profile Details
window pane, click the 802.11g radio profile drop-down list and select the desired profile from the list
4. Click Apply. The profile name appears in the Profile list with your configured settings. If you configure this
for the AP group, this profile also becomes the selected 802.11a or 802.11g RF management profile used by
the mesh portal for your mesh network.
Adding a Mesh Cluster Profile
Use the following procedure to add a mesh cluster profile to a remote mesh AP or AP group:
1. Navigate to the Configuration > Wireless > AP Configuration window. Select either the AP Group or AP
Specific tab.
 If you selected AP Group, click the Edit button by the AP group name to which you want to assign a new
mesh cluster profile.
 If you selected AP Specific, click the Edit button by the AP to which you want to assign a new mesh
cluster profile
2. Under the Profiles list, expand the Mesh menu, then select Mesh Cluster profile.
3. In the Profile Details window pane, click the Mesh Cluster profile drop-down list select New.
z To add an existing mesh-cluster profile to the selected AP group, click the Add a profile drop-down list
and select a new profile name from the list.