Users Guide

338 | Virtual Intranet Access Dell PowerConnect ArubaOS 5.0 | [User Guide
Figure 58 VIA - Configure VIA Connection Profile
You can configure the following options for a VIA connection profile.
Table 64 VIA - Connection Profile Options
Configuration Option Description
VIA Controller Enter the following information about the VIA controller.
z Controller Hostname/IP Address: This is the public IP address or the DNS
hostname of the VIA controller. Users will connect to remote server using this IP
address or the hostname.
z Controller Internal IP Address: This is the IP address of any of the VLAN interface
IP addresses belongs to this controller.
z Controller Description: This is a human-readable description of the controller.
Click the Add button after you have entered all the details. If you have more than one
VIA controller you order them by clicking the Up and Down arrows.
To delete a controller from your list, select a controller and click the Delete button.
VIA Authentication Profiles to
provision
This is the list of VIA authentication profiles that will be displayed to users in the VIA
client. See “Create VIA Authentication Profile” on page336.
z Select an authentication profile and click the Add button to add to the
authentication profiles list.
z You can change the order of the list by clicking the Up and Down arrows.
z To delete an authentication profile, select a profile name and click the Delete
button.
VIA tunneled networks A list of network destination (IP address and netmask) that the VIA client will tunnel
through the controller. All other network destinations will be reachable directly by the
VIA client.
z Enter an IP address & network mask and click the Add button to add to the
tunneled networks list.
z To delete a network entry, select the IP address and click the Delete button.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
1
2
3