Users Guide

Dell PowerConnect ArubaOS 5.0 | User Guide RF Plan | 95
3. Modify the FQLN attributes:
z In the Provisioning page, scroll to the FQLN Mapper near the bottom of the page and modify the campus,
building, and floor attributes.
z Optionally, if you want rename an AP, scroll to the AP List at the bottom of the page and enter the new
name in the AP Name field. For more information about AP names, see Chapter 4, “Access Points”
4. Click Apply and Reboot.
Using CLI
Reprovisioning the AP causes it to automatically reboot. When configuring the FQLN, you may also provision
other AP settings.
The following example assumes you are not renaming an AP. For more information about AP names, see Chapter
4, “Access Points” .
provision-ap
read-bootinfo ap-name <name>
copy-provisioning-params ap-name <name>
fqln <name>
reprovision ap-name <name>
RF Plan Example
This section guides you through the process of creating a building and populating it with APs and AMs using RF
Plan. Ensure you have sample.JPEG floor images handy for walking through this planning example.
Sample Building
Table 20 list the information to be used in this coverage-based planning example.
Table 20 Sample Building
Building Dimensions
Height: 100
Width: 100
Number of Floors: 2
User Information
Number of Users: N/A
Users per AP: N/A
Radio Types: 802.11a/b/g/n
AP Type: 93
Overlap Factor: 150% (Medium)
AP Desired Rates (5 GHz Radio Properties)
802.11a Desired Rate: 48 Mbps
802.11n (HT) Support: N/A
Use 40 MHz Channel Spacing: N/A
802.11n Desired Rate: N/A