Reference Guide

Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide ap regulatory-domain-profile | 105
Examples
The following command configures the regulatory domain profile for APs in Japan:
(host) (config) #ap regulatory-domain-profile rd1
country-code JP
The following command configures a regulatory domain profile for APs in the United States and specifies that the
channel pair of 36 and 40, is allowed for 40 MHz mode of operation on the 5 GHz frequency band:
(host) (config) #ap regulatory-domain-profile usa1
country-code US
valid-11a-40mhz-channel-pair 36-40
The following command configures a regulatory domain profile for APs in the United States and specifies that the
channel pair of 5 and 1, is allowed for 40 MHz mode of operation on the 2.4 GHz frequency band:
(host) (config) #ap regulatory-domain-profile usa1
country-code US
valid-11g-40mhz-channel-pair 1-5
Related Commands
To view the supported channels, use the show ap allowed-channels command.
AP configuration settings related to the IEEE 802.11n standard are configurable for Dell’s W-AP120 series access
points, which are IEEE 802.11n standard compliant devices.
Command History
Command Information
Release Modification
ArubaOS 3.0 Command introduced
ArubaOS 3.3 Support for the IEEE 802.11n standard, including channel pairs for 40 MHz mode of
operation, was introduced
ArubaOS 5.0 The valid-11g-40mhz-channel-pair and valid-11g-40mhz-channel-pair parameters no
longer support the + and - parameters that allowed you to define a primary and backup
channel within the channel pair.
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers