Reference Guide

Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide show rf dot11a-radio-profile | 1051
Command History
Command Information
Enable CSA Shows if Channel Switch Announcements (CSAs) are enabled or disabled. CSAs, as
defined by IEEE 802.11h, enable an AP to announce that it is switching to a new channel
before it begins transmitting on that channel. This allows clients that support CSA to
transition to the new channel with minimal downtime.
CSA Count Number of channel switch announcements that must be sent prior to switching to a new
channel. The default CSA count is 4 announcements.
Management Frame Throttle
Interval
Averaging interval for rate limiting mgmt frames from this radio, in seconds. A management
frame throttle interval of 0 seconds disables rate limiting.
Management Frame Throttle Limit Maximum number of management frames that can come in from this radio in each throttle
interval.
ARM/WIDS Override If enabled, this option disables Adaptive Radio Management (ARM) and Wireless IDS
functions and slightly increases packet processing performance. If a radio is configured to
operate in Air Monitor mode, then the ARM/WIDS override functions are always enabled,
regardless of whether or not this check box is selected.
Adaptive Radio Management
(ARM) Profile
Name of an Adaptive Radio Management profile associated with this 802.11a profile.
High-throughput Radio Profile Name of a High Throughput Radio profile associated with this 802.11a profile.
Release Modification
ArubaOS 3.0 Command introduced.
ArubaOS 3.3.2 Introduced support for the high-throughput IEEE 802.11n standard.
ArubaOS 3.4.0 Support for the following parameters:
z Spectrum load balancing
z RX Sensitivity Tuning Based Channel Reuse
z RX Sensitivity Threshold
z ARM/WIDS Override
ArubaOS 3.4.2 Support for the Beacon Regulate parameter
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on local and master
controllers
Parameter Description