Reference Guide

1074 | show rrm dot11k neighbor-report Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide
show rrm dot11k neighbor-report
show rrm dot11k neighbor-report [ap-name <name-of-an-ap> <essid> |
bssid <bssid-of-an-ap> | ip-addr <ip-address-of-an-ap>]
Description
Displays the neighbor information for a particular AP. If the AP name or the AP’s IP address is specified, the user
should specify the ESSID to get the neighbor information. If the ESSID is not specified, the command will
display the neighbor information for all the Virtual AP's configured on the AP.
Syntax
Example
The output of this command shows the neighbor information for r-wing-94.
Command History
This command was available in ArubaOS 3.4
Command Information
Parameter Description
ap-name Enter the name of the AP.
bssid Enter the BSSID address of the AP.
ip-addr Enter the IP address of the AP.
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or local
controllers
(host) # show rrm dot11k neighbor-report ap-name r-wing-94
802.11K Neighbor Report Details
-------------------------------
Flags: S: Spectrum Management, Q: QoS, A: APSD, R: Radio Measurement
ESSID BSSID Channel Reachability Security Authenticator Preference Flags
----- ----- ------- ------------ -------- ------------- ---------- -----
r-wing-voice 00:0b:86:6d:3e:30 165 Reachable Same Same 1 SR
r-wing-voice 00:0b:86:6d:3e:20 1 Reachable Same Same 1 SR
r-wing-data 00:0b:86:6d:3e:40 6 Reachable Same Same 1 SR
r-wing-data 00:0b:86:6d:4e:41 153 Reachable Same Same 1 SR
Num Entries:4