Reference Guide

Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide ap system-profile | 109
aeroscout-rtls-
server
Enables the AP to send RFID tag information to an
AeroScout real-time asset location (RTLS) server.
——
ip-addr IP address of the AeroScout server to which location
reports are sent.
——
port Port number on the AeroScout server to which location
reports are sent.
——
bkup-lms-ip In multi-controller networks, specifies the IP address of a
backup to the IP address specified with the lms-ip
parameter.
——
bootstrap-
threshold
Number of consecutive missed heartbeats on a GRE tunnel
(heartbeats are sent once per second on each tunnel)
before an AP rebootstraps. On the controller, the GRE
tunnel timeout is 1.5 x bootstrap-threshold; the tunnel is
torn down after this number of seconds of inactivity on the
tunnel.
1-65535 8
clone Name of an existing AP system profile from which
parameter values are copied.
——
dns-domain Name of domain that is resolved by corporate DNS servers.
Use this parameter when configuring split tunnel.
——
double-encrypt This parameter applies only to remote APs. Use double
encryption for traffic to and from a wireless client that is
connected to a tunneled SSID.
When enabled, all traffic is re-encrypted in the IPsec
tunnel. When disabled, the wireless frame is only
encapsulated inside the IPsec tunnel.
All other types of data traffic between the controller and
the AP (wired traffic and traffic from a split-tunneled SSID)
are always encrypted in the IPsec tunnel.
— disabled
dump-server (For debugging purposes.) Specifies the server to receive a
core dump generated when an AP process crashes.
——
heartbeat-dscp DSCP value of AP heartbeats. 0-63 0
keepalive-inter
val
Time, in seconds, between keepalive messages from the
AP.
30-65535 60 seconds
led-mode The operating mode for the AP LEDs (W-AP120, W-AP124
and W-AP125 only)
normal
normal Display LEDs in normal mode.
off Turn off all LEDs.
lms-hold-down-
period
Time, in seconds, that the primary LMS must be available
before an AP returns to that LMS after failover.
1-3600 600 seconds
lms-ip In multi-controller networks, specifies the IP address of the
local management switch (LMS)—the Dell controller—
which is responsible for terminating user traffic from the
APs, and processing and forwarding the traffic to the wired
network. This can be the IP address of the local or master
controller.
When using redundant controllers as the LMS, set this
parameter to be the VRRP IP address to ensure that APs
always have an active IP address with which to terminate
sessions.
——
lms-preemption Automatically reverts to the primary LMS IP address when
it becomes available.
— disabled
Parameter Description Range Default