Reference Guide

Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide show wlan traffic-management-profile | 1181
show wlan traffic-management-profile
show wlan traffic-management-profile [<profile>]
Description
Show a list of all traffic management profiles, or display detailed configuration information for a specific traffic
management profile.
Syntax
Usage Guidelines
Issue this command without the <profile> parameter to display the entire Traffic Management profile list,
including profile status and the number of references to each profile. Include a profile name to display detailed
configuration information for that profile.
Examples
The example below shows that the controller has three configured Traffic Management profiles. The References
column lists the number of other profiles with references to the Traffic Management profile, and the Profile
Status column indicates whether the profile is predefined. (User-defined profiles will not have an entry in the
Profile Status column.)
The following example shows configuration settings defined for the profile mgmt1.
The output of this command includes the following data columns:
Parameter Description
<profile> Name of a Traffic Management profile.
Parameter Description
Proportional BW
Allocation
Minimum bandwidth, as a percentage of available bandwidth, allocated to an SSID when
there is congestion on the wireless network. An SSID can use all available bandwidth if no
other SSIDs are active.
Report interval Number of minutes between bandwidth usage reports.
(host) #show wlan
Traffic management profile List
-------------------------------
Name References Profile Status
---- ---------- --------------
mgmt1 1
mgmt3 0
mgmt4 2
Total: 3
(host) #show wlan traffic-management-profile mgmt1
Traffic management profile "default"
------------------------------------
Parameter Value
--------- -----
Proportional BW Allocation N/A
Report interval 5 min
Station Shaping Policy default-access