Reference Guide

Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide trusted | 1235
trusted
trusted all
Description
This command makes all physical interfaces on the controller trusted ports.
Syntax
Usage Guidelines
Trusted ports are typically connected to internal controlled networks. Untrusted ports connect to third-party APs,
public areas, or any other network to which the controller should provide access control. When Aruba APs are
attached directly to the controller, set the connecting port to be trusted.
By default, all ports on the controller are treated as trusted. You can use the interface fastethernet or interface
gigabitethernet commands to make individual ports trusted.
Example
The following command makes all ports trusted:
(host) (config) #trusted all
Command History
The command was introduced in ArubaOS 2.0.
Command Information
Parameter Description
all
Makes all ports on the controller trusted.
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers