Reference Guide

1260 | vpn-dialer Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide
Usage Guidelines
A VPN dialer is a Windows application that configures a Windows client for use with the VPN services in the
controller. When VPN is used as an access method, a user can login using captive portal and download a VPN
dialer. You can customize a VPN dialer for a user role configured with the user-role command. After the user
authenticates via captive portal, a link appears to allow download of the VPN dialer if a dialer is configured for the
user role.
Example
The following command configures a VPN dialer:
(host) (config) #vpn-dialer default-dialer
ike authentication pre-share f00xYz123BcA
Command History
The command was introduced in ArubaOS 3.0.
Command Information
lifetime
Specifies how long an IPsec security association lasts, in seconds. 300-86400 7200 seconds
pfs
Specifies the IPsec Perfect Forward Secrecy (PFS) mode, either
group 1 or group 2.
group1 |
group2
group2
no
Negates any configured parameter. — —
ppp authentica
tion
Enables the protocols for PPP authentication. This list should
match the L2TP or PPTP configuration configured with the vpdn
command on the controller.
——
cache-secur
id
The controller caches Secure ID tokens so that the user does not
need to reauthenticate each time a network connection is lost.
— disabled
chap
Use CHAP with PPP authentication. — enabled
mschap
Use MSCHAP with PPP authentication. — enabled
mschapv2
Use MSCHAPv2 with PPP authentication. — enabled
pap
Use PAP with PPP authentication. — enabled
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers
Parameter Description Range Default