Reference Guide

1294 | wlan ssid-profile Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide
Usage Guidelines
The SSID profile configures the SSID.
Default WMM mappings exist for all SSIDs. After you customize an WMM mapping and apply it to the SSID,
the controller overwrites the default mapping values and uses the user-configured values.
wpa2-tkip
WPA2 with TKIP encryption and dynamic keys using 802.1x.
xSec
Encryption and tunneling of Layer-2 traffic between the controller and
wired or wireless clients, or between controllers. To use xSec encryption,
you must use a RADIUS authentication server. For clients, you must install
the Funk Odyssey client software.
Requires installation of the xSec license. For xSec between controllers,
you must install an xSec license in each controller.
rts-threshold
Wireless clients transmitting frames larger than this threshold must issue
Request to Send (RTS) and wait for the AP to respond with Clear to Send
(CTS). This helps prevent mid-air collisions for wireless clients that are
not within wireless peer range and cannot detect when other wireless
clients are transmitting.
2333 bytes
short-preamble
Enables or disables short preamble for 802.11b/g radios. Network
performance may be higher when short preamble is enabled. In mixed
radio environments, some 802.11b wireless client stations may
experience difficulty associating with the AP using short preamble. To use
only long preamble, disable short preamble. Legacy client devices that
use only long preamble generally can be updated to support short
preamble.
— enabled
ssid-enable
Enables/disables this SSID. — enabled
strict-svp
Enable Strict Spectralink Voice Protocol (SVP) — disabled
wepkey1 -
wepkey4
Static WEP key associated with the key index. Can be 10 or 26 hex
characters in length.
——
weptxkey
Key index that specifies which static WEP key is to be used. Can be 1, 2, 3,
or 4.
1, 2, 3, 4 1
wmm
Enables or disables WMM, also known as IEEE 802.11e Enhanced
Distribution Coordination Function (EDCF). WMM provides prioritization of
specific traffic relative to other traffic in the network.
— disabled
wmm-be-dscp
DSCP value used to map WMM best-effort traffic. 0-255 24
wmm-bk-dscp
DSCP used to map WMM background traffic. 0-255 8
wmm-ts-min-in
act-int
Specifies the minimum inactivity time-out threshold of WMM traffic. This
setting is useful in environments where low inactivity interval time-outs
are advertised, which may cause unwanted timeouts.
0-
3,600,000
0
millisecond
s
wmm-uapsd
Enable Wireless Multimedia (WMM) UAPSD powersave. — enabled
wmm-vi-dscp
DSCP used to map WMM video traffic. 0-255 40
wmm-vo-dscp
DSCP used to map WMM voice traffic. 0-255 56
wpa-hexkey
WPA pre-shared key (PSK). — —
wpa-passphrase
WPA passphrase with which to generate a pre-shared key (PSK). — —
Parameter Description Range Default
Note: AP configuration settings related to the IEEE 802.11n standard are configurable for Dell’s W-AP120 series access points,
which are IEEE 802.11n standard compliant devices.