Reference Guide

Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide wlan voip-cac-profile | 1305
Usage Guidelines
The VoIP CAC profile prevents any single AP from becoming congested with voice calls.
Example
The following command enables VoIP CAC:
(host) (config) #wlan voip-cac-profile cac1
call-admission-control
disconnect-extra-call
Command History
Command Information
send-sip-status-code
client|server <code>
Use this parameter with the client or server options to drop
a SIP Invite and send status code back to the client or
server. You must also include one of the following codes:
z 480: Temporary Unavailable
z 486: Busy Here
z 503: Ser vice Unavailable
z none: Don't send SIP status code
—486
wmm_tspec_en
forcement
Enables validation of TSPEC requests for CAC. — disabled
wmm_tspec_en
forcement_
period
Maximum time for the station to start the call after the
TSPEC request.
1-100 1 second
Version Change
ArubaOS 3.0 Command introduced
ArubaOS 3.4 The following parameters were deprecated:
z active-load-balancing
z high-threshold-capacity
z noe-call-capacity
z sccp-call-capacity
z svp-call-capacity
z vocera-call-capacity
The following parameters were introduced:
z bandwidth-cac
z bandwidth-capacity
z call-capacity
ArubaOS 3.4.1 License requirements changed in ArubaOS 3.4.1, so the command required the PEF license
instead of the Voice Services Module license required in earlier versions.
Platforms Licensing Command Mode
All platforms PEFNG license Config mode on master controllers
Parameter Description Range Default