Reference Guide

Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide clear | 155
datapath Clears all configuration values and statistics for the following datapath modules.
z application
z bridge
z bwm
z crypto
z dma
z frame
z hardware
z ip-reassembly
z maintenance
z message-queue
z route
z route-cache
z session
z station
z tunnel
z user
z wifi-reassembly
z wmm
dot1x Clears all 802.1x specific counters and supplicant statistics. Use the following parameters:
z counters
z supplicant-info
fault Clears all SNMP fault configuration.
gap-db Clears global AP database. This command is often used to clear all stale AP records. Use the
following parameters:
z ap-name
z lms
z wired-mac
ip Clears all IP information from DHCP bindings, IGMP groups and IP mobility configuration. Use
the following parameters:
z dhcp
z igmp
z mobile
ipc Clears all inter process communication statistics.
ipv6 Clears all IPv6 session and user statistics. Use the following parameters:
z datapath session counters
z datapath user counters
loginsession Clears loginsession information for a specific login session, as identified by the session id.
master-local-entry Clears local controller information from the master controller LMS list. Specify the IP address
of the local controller to be removed from master controller active LMS list.
master-local-session Clear and reset master local TCP connection. Specify the IP address of either the master or
local controller.
port Clear all port statistics that includes link-event counters or all counters. Use the following
parameters:
z link-event
z stats
provisioning-ap-list Clear AP entries from the provisioning list.
provisioning-params Clear provisioning parameters and reset them to the default configuration values.
rap-wml Clear wired MAC lookup cache for a DB server.
Parameter Description