Reference Guide

Table Of Contents
156 | clear Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide
Usage Guidelines
The clear command will clear the specified parameters of their current values.
Example
The following command clears all aaa counters for all authentication servers:
(host) (config) #clear aaa authentication-server all
Command History
This command was introduced in ArubaOS 3.0.
Command Information
update-counter Clear all update counter statistics.
voice Clear all voice state information. Use the following parameters:
z call-counters
z call-status
vpdn Clear all VPDN configuration for L2TP and PPTP tunnel. Use the following parameters:
z tunnel l2tp id <l2tp-tunnel-id>
z tunnel pptp id <pptp-tunnel-id>
wms Clear all WLAN management commands. Use the following parameters:
z ap—clear all AP related commands. Specify the BSSID of the AP.
z client—clear all wired client related commands. Specify the MAC address of the client.
z probe—clear all probe information. Specify the BSSID of the probe.
z wired-mac—clear all wired MAC information. You can specify MAC of APs, or name of
an AP.
wired-mac <mac-address>
wired-mac ap-name <name of the AP>
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on master controllers
Parameter Description