Reference Guide

Table Of Contents
188 | crypto-local isakmp dpd Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide
crypto-local isakmp dpd
crypto-local isakmp dpd idle-timeout <seconds> retry-timeout <seconds> retry-attempts
<number>
Description
This command configures IKE Dead Peer Detection (DPD) on the local controller.
Syntax
Usage Guidelines
DPD is enabled by default on the controller for site-to-site VPN.
Example
This command configures DPD parameters:
crypto-local isakmp dpd idle-timeout 60 retry-timeout 3 retry-attempts 5
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Parameter Description Range Default
idle-timeout Idle timeout, in seconds. 10-3600 22 seconds
retry-timeout Retry interval, in seconds. 2-60 2 seconds
retry-attempts Number of retry attempts. 3-10 3
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master and local controllers