Reference Guide

212 | esi parser domain Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide
esi parser domain
esi parser domain <name>
[no] |
[peer <peer-ip>] |
[server <ipaddr>]
Description
This command configures an ESI syslog parser domain.
Syntax
Usage Guidelines
The ESI parser is a generic syslog parser on the controller that accepts syslog messages from external third-party
appliances such as anti-virus gateways, content filters, and intrusion detection systems. It processes syslog
messages according to user-defined rules and takes configurable actions on the corresponding system users.
ESI servers (see “esi server” on page 219) are configured into domains to which ESI syslog parser rules (see “esi
parser rule” on page 213) are applied.
Use the
show esi parser domains command to show ESI parser domain information.
Example
The following commands configure a virus syslog parser domain named “fortinet” which contains the ESI server
“forti_1” with the trusted IP address configured using the command “esi server” on page 219.
(host) (config) #esi parser domain fortinet
server 10.168.172.3
Command History
Introduced in ArubaOS 3.1.
Command Information
Parameter Description
no Negates any configured parameter
peer (Optional.) Specify the IP address of an another controller in this domain. These controllers are notified
when the user cannot be found locally. This command is needed only when multiple controllers share a
single ESI server
server Specify the IP address of the ESI server to which the controller listens.
Platform License Command Mode
Available on all platforms Requires the PEFNG license Config mode on master or local
controllers