Reference Guide

Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide aaa authentication stateful-dot1x | 23
aaa authentication stateful-dot1x
aaa authentication stateful-dot1x
default-role <role>
enable
no ...
server-group <group>
timeout <seconds>
Description
This command configures 802.1x authentication for clients on non-Dell APs.
Syntax
Usage Guidelines
This command configures 802.1x authentication for clients on non-Dell APs. The controller maintains user
session state information for these clients.
Example
The following command assigns the employee user role to clients who successfully authenticate with the server
group corp-rad:
aaa authentication stateful-dot1x
default-role employee
server-group corp-rad
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Parameter Description Range Default
default-role
<role>
Role assigned to the 802.1x user upon login.
NOTE: The PEFNG license must be installed.
— guest
enable Enables 802.1x authentication for clients on non-Dell APs.
Use no enable to disable this authentication.
— enabled
no Negates any configured parameter. — —
server-group
<group>
Name of the group of RADIUS servers used to authenticate
the 802.1x users. See “aaa server-group” on page 65.
——
timeout <seconds> Timeout period, in seconds. 1-20 10 seconds
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers