Reference Guide

26 | aaa authentication via auth-profile Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide
aaa authentication via auth-profile
aaa authentication via auth-profile <profile>
clone <source>
default-role <default-role>
desc <description>
max-authentication-failures <max-authentication-failures>
no
server-group <server-group>
Description
This command configures the VIA authentication profile.
Syntax
Usage Guidelines
Use this command to create VIA authentication profiles and associate user roles to the authentication profile.
Example
(host) (config) #aaa authentication via auth-profile default
(host) (VIA Authentication Profile "default") #default-role example-via-role
(host) (VIA Authentication Profile "default") #desc "Default VIA Authentication
Profile"
(host) (VIA Authentication Profile "default") #server-group "via-server-group"
Command History
Command introduced in ArubaOS 5.0
Command Information
Parameter Description Default
clone <source>
default-role <default-role> Name of the default VIA authentication profile. -
desc <description> Description of this profile for reference. -
max-authentication-failures
<max-authentication-failures>
Number of times Aruba VIA will prompt user to login due to
incorrect credentials. After the maximum authentication
attempts failures Aruba VIA will exit.
3
server-group <server-group> Server group against which the user is authenticated. -
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master or local controllers