Reference Guide

Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide loginsession | 373
loginsession
loginsession timeout <minutes>
Description
This command configures the time management session (via Telnet or SSH) remains active without user activity.
Syntax
Usage Guidelines
The management user must re-login to the controller after a Telnet or SSH session times out. If you set the
timeout value to 0, sessions do not time out.
Example
The following command configures management sessions on the controller to not time out:
(host) (config) #loginsession timeout 0
Command History
This command was available in ArubaOS 3.0
Command Information
Parameter Description Range Default
timeout Number of minutes that a management session remains active without
any user activity.
5-60, 0 to
disable
15 minutes
Note: The TCP session timeout for wireless and wired user sessions through the controller is 15 minutes; this timeout for user
sessions is not configurable.
Platform License Command Mode
Available on all platforms Requires the PEFNG license Config mode on master
controllers