Reference Guide

Table Of Contents
Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide mux-address | 389
mux-address
mux-address <ipaddr>
Description
This command configures the IP address of a multiplexer (MUX) server.
Syntax
Usage Guidelines
An Dell controller can operate as a Wi-Fi MUX server, terminating GRE tunnels from MUX switches. As a Wi-Fi
MUX server, the controller does not perform full Wi-Fi switching functions. Instead, it accepts traffic from ports
designated as MUX ports, packages this traffic inside a GRE tunnel, and forwards the traffic back to a central
controller for processing.
Example
The following command configures the address of a MUX server:
(host) (config) #mux-address 192.168.1.245
Command History
This command was introduced in ArubaOS 3.0
Command Information
Parameter Description
mux-address IP address of the MUX server. This is the loopback or IP address of the controller acting as a
MUX server.
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers