Reference Guide

Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide mux-loop-prevention | 391
mux-loop-prevention
mux-loop-prevention
Description
This command prevents prevent forwarding loops between MUX tunnels on MUX server.
Syntax
No parameters.
Usage Guidelines
To prevent broadcast traffic being flooded on the MUX tunnels. You need to enable broadcast-filter-arp if you
want to allow a MUX-connected machine communicate with another MUX-connected client on the same
subnet.
Example
The following command prevents MUX-tunnel forwarding:
(host) (config) #mux-loop-prevention
Command History
This command was introduced in ArubaOS 34.
Related Commands
(host) (config) #show mux config
(host) (config) #show mux state
Command History
This command was introduced in ArubaOS 3.4
Command Information
Note: The MUX loop prevention function appears on the WebUI as the “Enable Wired Access Concentrator Loop Prevention”
option. It is located on the Configuration > Advanced Services > Wired Access > Wired Access Concentration Configuration pane
Platforms Licensing Command Mode
All platforms Requires the PEFNG license. Config mode on master controllers