Reference Guide

Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide show aaa authentication stateful-ntlm | 495
show aaa authentication stateful-ntlm
show aaa authentication stateful-ntlm
Description
This command displays configuration settings for the Stateful NTLM Authentication profile. Issue this
command without the <profile-name> option to display the entire Stateful NTLM Authentication profile list,
including profile status and the number of references to each profile. Include a profile name to display detailed
Stateful NTLM authentication configuration information for that profile.
Syntax
Usage Guidelines
Issue this command to identify the default role assigned to users who have successfully authenticated the using
NT Lan Manager (NTLM) authentication protocol, the name of the group of windows servers used to
authenticate these users, and the NTLM authentication timeout period, in seconds.
Examples
The output of the example below shows two stateful NTLM authentication profiles, default and NTLMprofile1,
which are each referenced one time by other profiles. the Profile Status columns are blank, indicating that these
profiles are both user-defined. (If a profile is predefined, the value Predefined appears in the Profile Status
column.)
The following example displays configuration details for the stateful NTLM authentication profile “default”.
Parameter Description
<profile-name> The name of an existing stateful-ntml authentication profile.
(host) #show aaa authentication stateful-ntlm
Stateful NTLM Authentication Profile List
-----------------------------------------
Name References Profile Status
---- ---------- --------------
default 1
NTLMprofile1 1
Total:2
(host) #show aaa authentication stateful-ntlm default
Stateful NTLM Authentication Profile "default"
----------------------------------------------
Parameter Value
--------- -----
Default Role guest
Server Group default
Mode Disabled
Timeout 10 sec