Reference Guide

500 | show aaa authentication via connection-profile Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide
Include a connection profile name to display a complete list of configuration settings for that profile. The
example below shows settings for the captive portal profile connection_1.
The output of this command includes the following parameters:
Table 1
Configuration Option Description
VIA Controller Displays the following information about the VIA controller:
z Controller Hostname/IP Address: This is the public IP address or the DNS hostname of the
VIA controller. Users will connect to remote server using this IP address or the hostname.
z Controller Internal IP Address: This is the IP address of any of the VLAN interface IP
addresses belongs to this controller.
z Controller Description: This is a human-readable description of the controller.
Client Auto-Login Enable or disable VIA client to auto login and establish a secure connection to the controller.
Default: Enabled
VIA Authentication Profiles to
provision
This is the list of VIA authentication profiles that will be displayed to users in the VIA client.
Allow client to auto-upgrade Enable or disable VIA client to automatically upgrade when an updated version of the client is
available on the controller.
Default: Enabled
VIA tunneled networks A list of network destination (IP address and netmask) that the VIA client will tunnel through
the controller. All other network destinations will be reachable directly by the VIA client.
Enable split-tunneling Enable or disable split tunneling.
z If enabled, all traffic to the VIA tunneled networks will go through the controller and the
rest is just bridged directly on the client.
z If disabled, all traffic will flow through the controller.
Default: off
Allow client-side logging Enable or disable client side logging. If enabled, VIA client will collect logs that can be sent to
the support email-address for troubleshooting.
Default: Enabled
(host)# show aaa authentication via connection-profile connection_1
VIA Connection Profile "connection_1"
-------------------------------------
Parameter Value
--------- -----
VIA controllers N/A
Client Auto-Login Enabled
VIA Authentication Profiles to provision N/A
Allow client to auto-upgrade Enabled
VIA tunneled networks N/A
Enable split tunneling Disabled
VIA Client WLAN profiles N/A
Allow client side logging Enabled
VIA IKE Policy Default
Use Windows Credentials Enabled
VIA IPSec Crypto Map default-dynamicmap/10000
Allow user to save passwords Enabled
VIA Client Network Mask 255.255.255.255
Validate Server Certificate Enabled
VIA Client DNS Suffix List N/A
VIA max session timeout 1440 min
VIA Support E-Mail Address N/A
Maximum reconnection attempts 3
VIA external download URL N/A
Allow user to disconnect VIA Enabled