Reference Guide

Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide show aaa authentication-server all | 509
show aaa authentication-server all
show aaa authentication-server all
Description
View authentication server settings for both external authentication servers and the internal controller database.
Usage Guidelines
The output of this command displays statistics for the Authentication Server Table,
including the name and address of each server, server type and configured authorization
and accounting ports.
Examples
The following command shows information for the internal Authentication server, and another RADIUS server
named RADIUS-1.
The following data columns appear in the output of this command:
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Parameter Description
Name Name of the authentication server.
Type The type of authentication server. ArubaOS supports LDAP, RADIUS and TACACS+ servers, in
addition to its own local, internal authentication server.
IP addr IP address of the server, in dotted-decimal format.
AuthPort Port number used for authentication. An LDAP server uses port 636 for LDAP over SSL, and
port 389 for SSL over LDAP, Start TLS operation andclear text. The default RADIUS
authentication port is port 1812.
AcctPort Accounting port on the server. The default RADIUS accounting port is port 1813.
AcctPort Accounting port on the server.
Status Shows whether the Authentication server is enable or disabled.
Requests Number of authentication requests received by the server.
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master or local
controllers
(host) #show aaa authentication-server all
Auth Server Table
-----------------
Name Type IP addr AuthPort AcctPort Status Requests
---- ---- ------- -------- -------- ------ --------
Internal Local 10.168.254.221 n/a n/a Enabled 5
SMOKERAD Radius 10.4.101.123 5555 5556 Enabled 1