Reference Guide

Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide show ap arm state | 579
show ap arm state
show ap arm state [ap-name <ap-name>|dot11a|dot11g|ip-addr <ip-addr>]
Description
Display Adaptive Radio Management (ARM) information for an individual AP’s neighbors, or show all available
data for any neighboring AP using an 802.11a or 802.11g radio type.
Syntax
Usage Guidelines
The output of the show ap arm state command shows 802.11a and 802.11g information for all APs. Include an AP
name or IP address to show data for just a single AP, or use the dot11a or dot11g keywords to show data for all APs
using that radio type.
Examples
The output of this command shows 802.11a information for all neighboring APs.
The output of this command includes the following information
Parameter Description
ap-name <ap-name> Show aggregate ARM Neighbor Information for a specific AP.
dot11a Show aggregate ARM Neighbor Information for all APs using an 802.11a radio.
dot11g Show aggregate ARM Neighbor Information for all APs using an 802.11g radio.
ip-addr <ip-addr> Show aggregate ARM Neighbor Information for a AP with a specific IP address by entering its
IP address in dotted-decimal format.
Column Description
Name Name of an AP.
IP address IP address of an AP.
(host)# show ap arm state
AP-AL39:10.6.1.206:48:19:23-Edge:enable
Neighbor Data
-------------
Name IP Address SNR Assignment
---- ---------- --- ----------
AL33 10.6.1.205 32 48/10
AP-AL33:10.6.1.205:48:10:23-Edge:disable
Neighbor Data
-------------
Name IP Address SNR Assignment
---- ---------- --- ----------
AL39 10.6.1.206 42 48/19
AL19 10.6.1.212 29 161/19
AL31 10.6.1.202 25 153/16
AL25 10.6.1.196 13 153/16
AL29 10.6.1.204 26 153/19