Reference Guide

582 | show ap association Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide
The output of this command includes the following information:
Column Description
Name Name of an AP
bssid The AP Basic Service Set Identifier (BSSID)
mac MAC address of the AP
auth This column displays a y if the AP has been configured for 802.11 authorization frame types.
Otherwise, it displays an n.
assoc This column displays a y if the AP has been configured for 802.11 association frame types.
Otherwise, it displays an n.
aid 802.11 association ID. A client receives a unique 802.11 association ID when it associates to
an AP.
1-int Number of beacons in the 802.11 listen interval. There are ten beacons sent per second, so a
ten-beacon listen interval indicates a listen interval time of 1 second.
essid Name that uniquely identifies the AP’s Extended Service Set Identifier (ESSID).
vlan-id Identification number of the AP’s VLAN.
tunnel-id Identification number of the AP’s tunnel.
assoc. time Amount of time the client has associated with the AP, in the format hours:minutes:seconds.
num assoc Number of clients associated with the AP.
flags This column displays any flags for this AP. The list of flag abbreviations is included in the
output of the show ap association command.
(host) #show ap association client-mac 00:13:fd:5c:7c:59
Flags: W: WMM client, A: Active, R: RRM client
PHY Details: HT: High throughput; 20: 20MHz; 40: 40MHz
ss: spatial streams
Association Table
-----------------
Association Table
-----------------
-----------------
Name bssid mac auth assoc aid l-int essid
---- ----- --- ---- ----- --- ----- -----
AL12 00:1a:1e:11:5f:11 00:21:5c:50:b1:ed y y 12 10 ethersphere-wpa2
AL5 00:1a:1e:88:88:31 00:19:7d:d6:74:93 y y 6 10 ethersphere-wpa2
vlan-id tunnel-id phy assoc time num assoc Flags