Reference Guide

Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide show ap debug bss-config | 613
Command History
Introduced in ArubaOS 3.0.
Command Information
fw-mode The configured forward mode for the AP’s virtual AP profile.
z bridge: Bridge locally
z split-tunnel: Tunnel to controller or NAT locally
z tunnel: Tunnel to controller
max-cl The maximum number of clients allowed for this BSSID.
preamble Shows if short preambles are enabled for 802.11b/g radios. Network performance may be
higher when short preamble is enabled. In mixed radio environments, some 802.11b wireless
client stations may experience difficulty associating with the AP using a short preamble.
MTU Maximum Transmission Unit (MTU) size, in bytes. This value describes the greatest amount of
data that can be transferred in one physical frame.
status Shows if this BSSID is enabled or disabled.
wmm Shows if the BSSID has enabled or disabled WMM, also known as IEEE 802.11e
Enhanced Distribution Coordination Function (EDCF) WMM provides prioritization of specific
traffic relative to other traffic in the network.
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master controllers
Column Description