Reference Guide

640 | show ap debug received-config Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide
Honor 40 MHz
intolerance
Shows if 40 MHz intolerance is enabled or disabled. If enabled, the radio will stop using the 40
MHz channels if the 40 MHz intolerance indication is received from another AP or station.
Legacy station
workaround
Shows if interoperability for misbehaving legacy stations is enabled or disabled.
Country Code Display the country code for the AP. The country code specifies allowed channels for that
country.
ESSID An Extended Service Set Identifier (ESSID), for the AP.
Encryption Encryption type used on this AP.
WPA2 Pre-Auth 802.11x settings are enabled or disabled.
DTIM Interval Number of beacons that should elapse before an AP sends beacon broadcasts for power save
clients.
802.11a Basic Rates Minimum data rate required for a client to associate with the AP. For an 802.11a radio, this
value can be 6, 12 and 24 802.11 data rates. 802.11b/g radios will report a value of 1 and 2 802.11
data rates.
802.11a Transmit
Rates
802.11 data rate at which the AP will transmit data to its clients. This value can be
6-54 for 802.11a radios, and 1-54 for 802.11b/g radios.
Station Ageout Time Number of seconds a station may be idle before it is deauthorized from an AP.
Max Transmit Attempts maximum number of times the AP will attempt to retransmit data.
RTS Threshold The minimum packet size at which the AP will issue a request-to-send (RTS) before sending
the packet.
Max Associations The maximum number of clients allowed to associated with the AP
Wireless Multimedia
(WMM)
Shows if Wireless Multimedia (WMM) is enabled or disabled for this AP. WMM provides
prioritization of specific traffic relative to other traffic in the network.
WMM TSPEC Min
Inactivity Interval
Displays the minimum inactivity time-out threshold of WMM traffic for this AP.
DSCP mapping for WMM
voice AC
Displays the DSCP value used to map WMM video traffic.
DSCP mapping for WMM
video AC
Displays the DSCP value used to map WMM voice traffic.
DSCP mapping for WMM
best-effort AC
Displays the DSCP value used to map WMM best-effort traffic
DSCP mapping for WMM
background AC
Displays the DSCP value used to map WMM background traffic.
Hide SSID Shows if the feature to hide a SSID name in beacon frames is enabled or disabled.
Deny_Broadcast Probes When a client sends a broadcast probe request frame to search for all available SSIDs, this
option controls whether or not the system responds for this SSID. When enabled, no response
is sent and clients have to know the SSID in order to associate to the SSID. When disabled, a
probe response frame is sent for this SSID.
Local Probe Response Shows if local probe response is enabled or disabled on the AP. If this option is enabled, the
AP is responsible for sending 802.11 probe responses to wireless clients’ probe requests. If
this option is disabled, then the controller sends the 802.11 probe responses
Disable Probe Retry Shows if the AP has enabled or disabled MAC-level retries for probe response frames. By
default this parameter is enabled, which mean that MAC level retries for probe response
frames is disabled.
Parameter Description