Reference Guide

Table Of Contents
Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide aaa tacacs-accounting | 69
aaa tacacs-accounting
aaa tacacs-accounting server-group <group> [command {action|all|configuration|show}]
[mode {enable|disable}]
Description
This command configures reporting of commands issued on the controller to a TACACS+ server group.
Syntax
Usage Guidelines
You must have previously configured the TACACS+ server and server group (see “aaa authentication-server
tacacs” on page42 and “aaa server-group” on page65).
Example
The following command enables accounting and reporting of configuration commands to the server-group
“tacacs1”:
aaa tacacs-accounting server-group tacacs1 mode enable command configuration
Command History
This command was available in ArubaOS 3.0.
Command Information
Parameter Description Range Default
server-group <group> The TACACS server group to which the reporting is sent.
command The types of commands that are reported to the TACACS
server group.
——
action Reports action commands only.
all Reports all commands.
configuration Reports configuration commands only
show Reports show commands only
mode Enables accounting for the server group. enable/
disable
disabled
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers