Reference Guide

690 | show ap monitor association Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide
show ap monitor association
show ap monitor association {ap-name <ap-name>}|{bssid <bssid>}|{ip-addr <ip-addr>}
<ap-bssid>
Description
Show the association table for an Air Monitor (AM).
Syntax
Examples
The output of the command lists the MAC addresses associated with the Air Monitor BSSID.
The output of this command includes the following information:
Command History
Introduced in ArubaOS 3.0.
Parameter Description
ap-name <ap-name> Show data for an AM with a specific name.
bssid <bssid> Show data for an AM with a specific Basic Service Set Identifier (BSSID). The Basic Service
Set Identifier (BSSID) is usually the AM’s MAC address.
ip-addr <ip-addr> Show data for an AM with a specific IP address by entering its IP address in dotted-decimal
format.
<ap-bssid> BSSID of an AP.
Column Description
mac MAC address associated with the Air Monitor BSSID
rsta-type Rogue station type:
z interfering: Interfering station.
z valid: Station is not a rogue station.
z DoS: Station may have attempted a DoS attack.
auth Displays a yes if the client has been authenticated.
phy-type The RF band in which the AP should operate:
802.11g = 2.4 GHz
802.11a = 5 GHz
(host) #show ap monitor association ap-name ap9 00:1a:1e:11:74:a1
Association Table
-----------------
mac rsta-type auth phy-type
--- --------- ---- --------
00:1d:d9:01:c4:50 valid yes 80211a
00:17:f2:4d:01:e2 valid yes 80211a
00:1f:3b:8c:28:89 valid yes 80211a
00:1d:d9:05:05:d0 valid yes 80211a
00:14:a4:25:72:6d valid yes 80211a
00:19:7d:d6:74:8d valid yes 80211a