Reference Guide

Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide show ap profile-usage | 703
show ap profile-usage
show ap profile-usage {ap-name <ap-name>|bssid <bssid>|ip-addr <ip-addr>}
Description
Show a complete list of all profiles referenced by an individual AP or an AP BSSID.
Syntax
Usage Guidelines
Use this command to monitor the configuration profiles in use by an AP or a specific BSSID. The output of this
command shows the name of each profile type that is associated with the AP or BSSID, as well as the source that
associates the profile with the AP.
Command History
Introduced in ArubaOS 3.0.
Command Information
Parameter Description
ap-name <ap-name> Show data for an AP with a specific name.
bssid <bssid> Show data for a specific Basic Service Set Identifier (BSSID) on an AP. The Basic Service Set
Identifier (BSSID) is usually the AP’s MAC address.
ip-addr <ip-addr> Show data for an AP with a specific IP address by entering its IP address in dotted-decimal
format.
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master controllers