Reference Guide

714 | show ap remote debug flash-config Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide
The output of this command includes the following information:
Command History
Introduced in ArubaOS 3.0.
Command Information
Column Description
Native VLAN VLAN ID of the native VLAN.
DHCP VLAN VLAN ID of Remote AP DHCP server used when the controller is unreachable.
DHCP ADDR IP Address used as DHCP Server Identifier.
DHCP POOL NETMASK Netmask of the DHCP server pool.
DHCP POOL START IP Address used as the start of a range of addresses for a DHCP pool.
DHCP POOL END IP Address used as the end of a range of addresses for a DHCP pool.
DHCP DNS SERVER IP Address for the DHCP DNS server.
DHCP ROUTER IP Address for the DHCP default router.
DHCP DNS DOMAIN Domain name for the DHCP DNS server.
DHCP LEASE Length of DHCP DNS leases in days. If this parameter displays a zero (0) the DHCP lease is has
no defined end.
Session ACL Name of the ACL applied to the user session.
Session ACL name Name of the ACL applied to the user session.
Session ACL count Number of rules in the applied to the user session.
Session Aces A list of the individual rules in the session ACL.
ACL 1 This parameter shows the position of an individual ACL.
ACL1 Name Name of the ACL in the first position.
ACL1 Count Number of rules in the specified ACL.
ACL1 Aces A list of the individual rules in the specified ACL.
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master controllers