Reference Guide

768 | show crypto isakmp Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide
show crypto isakmp
show crypto isakmp {groupname}|{key}|{policy}|{sa[peer <peer-ip>]|stats}
Descriptions
This command displays Internet Key Exchange (IKE) parameters for the Internet Security Association and Key
Management Protocol (ISAKMP).
Syntax
Usage Guidelines
Use the show crypto key command to view the IKE pre-shared keys.
Examples
The command show crypto isakmp stats shows the IKE statistics.
Parameter Description
groupname Show the IKE Aggressive group name.
key Show the IKE pre-shared keys.
policy Show the IKE configured policies.
sa Show the security associations
peer <peer-ip> Shows crypto isakmp security associations for this IP.
stats Show the IKE statistics.
(host) #show crypto isakmp stats
Main Mode Initiator exchanges started/completed = 0/0
Main Mode Responder exchanges started/completed = 0/0
Aggr Mode Initiator exchanges started/completed = 0/0
Aggr Mode Responder exchanges started/completed = 0/0
Quick Mode Initiator exchanges started/completed = 0/0
Quick Mode Responder exchanges started/completed = 0/0
XAuth Type1 Responder exchanges started/completed = 0/0
XAuth Type2 Responder exchanges started/completed = 0/0
Mode-Config Responder exchanges started/completed = 0/0
Phase1 SAs Current/Max/Total = 0/0/0
Phase2 SAs Current/Max/Total = 0/0/0
VPN Sessions Total/RAPs/Master-Local/Redundancy = 0/0/0/0
VPN License Limits Total/Platform/Current/Violation = 16777215/16777215/0/0
Switch Role: Master
CFGM triggers: Master/Local/Redund/Failed/Total = 74682/0/0/0/74682
Redundancy changes: Master->Standby/Standby->Master = 0/0
FPAPPS TX messages: Tunnel-Up/Tunnel-Down = 0/0
FPAPPS TX messages: cfg-map-add/cfg-map-del = 0/0
FPAPPS TX messages: Peer-map-add/Peer-map-del = 0/0
FPAPPS TX messages: SwitchIP-mapadd/SwitchIP-mapdel = 0/0
FPAPPS TX messages: New-SwitchIP-map-adds = 0
Datapath To Control DPD Triggers Received = 0
DPD Initiate Reqs-Sent/Re-Sent/Replies-Rcvd/Dropped = 0/0/0/0