Reference Guide

Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide show ids dos-profile | 839
show ids dos-profile
show ids dos-profile <profile-name>
Description
Show an IDS Denial Of Service (DoS) Profile
Syntax
Usage Guidelines
Issue this command without the <profile> parameter to display the entire IDS DoS profile list, including profile
status and the number of references to each profile. Include a profile name to display detailed configuration
information for that profile.
Examples
The example below shows that the controller has four configured DoS profiles.
This example displays the configuration settings for the profile ids-dos-disabled.
Parameter Description
<profile-name> Name of an IDS DoS profile.
(host) # show ids dos-profile
IDS Denial Of Service Profile List
----------------------------------
Name References Profile Status
---- ---------- --------------
default 1
ids-dos-disabled 1 Predefined
ids-dos-high-setting 1 Predefined
ids-dos-low-setting 1 Predefined
ids-dos-medium-setting 1 Predefined
(host) # show ids dos-profile ids-dos-disabled
IDS Denial Of Service Profile "ids-dos-disabled" (Predefined)
------------------------------------------------------------
Parameter Value
--------- -----
Spoofed Deauth Blacklist Disabled
Detect AP Flood Attack false
AP Flood Threshold 50
AP Flood Increase Time 3 sec
AP Flood Detection Quiet Time 900 sec
Detect EAP Rate Anomaly false
EAP Rate Threshold 60
EAP Rate Time Interval 3 sec
EAP Rate Quiet Time 900 sec
Detect Rate Anomalies false
Rate Thresholds for Assoc Frames default
Rate Thresholds for Disassoc Frames default
Rate Thresholds for Deauth Frames default
Rate Thresholds for Probe Request Frames default
Rate Thresholds for Probe Response Frames default
Rate Thresholds for Auth Frames default
Detect 802.11n 40MHz Intolerance Setting false
Client 40MHz Intolerance Detection Quiet Time 900