Reference Guide

842 | show ids general-profile Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide
show ids general-profile
show ids general-profile <profile-name>
Description
Show an IDS General profile.
Syntax
Usage Guidelines
Issue this command without the <profile> parameter to display the entire IDS General profile list, including
profile status and the number of references to each profile. Include a profile name to display detailed
configuration information for that profile.
Examples
The example below shows that the controller has four configured General profiles.
This example displays the configuration settings for the profile default.
The output of this command includes the following parameters:
Parameter Description
<profile-name> Name of an IDS General profile.
Parameter Description
Stats Update Interval Interval, in seconds, for the AP to update the controller with statistics. This setting takes
effect only if the Dell Mobility Manager is configured. Otherwise, statistics update to the
controller is disabled.
AP Inactivity Timeout Time, in seconds, after which an AP is aged out.
(host) # show ids general-profile
IDS General Profile List
------------------------
Name References Profile Status
---- ---------- --------------
default 3
ids-general-disabled 1 Predefined
ids-general-high-setting 1 Predefined
test1 0
Total:4
(host) # show ids general-profile default
IDS General Profile "default"
-----------------------------
Parameter Value
--------- -----
Stats Update Interval 60 sec
AP Inactivity Timeout 5 sec
STA Inactivity Timeout 60 sec
Min Potential AP Beacon Rate 25 %
Min Potential AP Monitor Time 3 sec
Signature Quiet Time 900 sec
Wireless Containment true
Debug Wireless Containment false
Wired Containment false
Mobility Manager RTLS false