Reference Guide

844 | show ids impersonation-profile Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide
show ids impersonation-profile
show ids impersonation-profile <profile-name>
Description
Show an IDS Impersonation Profile.
Syntax
Usage Guidelines
Issue this command without the <profile> parameter to display the entire IDS Impersonation profile list,
including profile status and the number of references to each profile. Include a profile name to display detailed
configuration information for that profile.
Examples
The example below shows that the controller has three configured Impersonation profiles.
This example displays the configuration settings for the profile ids-impersonation-high-setting.
The output of this command includes the following parameters:
Parameter Description
<profile-name> Name of an IDS Impersonation profile.
Parameter Description
Detect AP Impersonation Shows of the profile has enabled or disabled detection of AP impersonation.
Protect from AP
Impersonation
Shows if AP impersonation is enabled or disabled for the profile. When AP impersonation
is detected, both the legitimate and impersonating AP are disabled using a denial of
service attack.
Beacon Diff Threshold Percentage increase in beacon rates that triggers an AP impersonation event.
Beacon Increase Wait
Time
Time, in seconds, after the beacon difference threshold is crossed before an AP
impersonation event is generated.
(host) # show ids impersonation-profile
IDS Impersonation Profile List
------------------------------
Name References Profile Status
---- ---------- --------------
default 3
ids-impersonation-disabled 1 Predefined
ids-impersonation-high-setting 1 Predefined
Total:3
(host) # show ids impersonation-profile ids-impersonation-high-setting
IDS Impersonation Profile “ids-impersonation-high-setting” (Predefined)
-----------------------------------------------------------------------
Parameter Value
--------- -----
Detect AP Impersonation true
Protect from AP Impersonation true
Beacon Diff Threshold 50 %
Beacon Increase Wait Time 3 sec