Reference Guide

850 | show ids signature-matching-profile Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide
show ids signature-matching-profile
show ids signature-matching-profile <profile-name>
Description
Show an IDS Signature Matching profile.
Syntax
Usage Guidelines
Issue this command without the <profile> parameter to display the entire IDS Signature Matching profile list,
including profile status and the number of references to each profile. Include a profile name to display detailed
configuration information for that profile.
Examples
The example below shows that the controller has two configured Signature Matching profiles.
This example displays the configuration settings for the profile factory-default-signatures.
The output of this command includes the following parameters:
Related Commands
Configure the Signature Matching profile using the command ids signature-matching-profile.
Command History
This command was available in ArubaOS 3.0.
Parameter Description
<profile-name> Name of an IDS Signature Matching profile.
Parameter Description
IDS Signature Name of a signature profile. See “ids signature-profile” on page258.
(host) # show ids signature-matching-profile
IDS Signature Matching Profile List
-----------------------------------
Name References Profile Status
---- ---------- --------------
default 2
factory-default-signatures 3 Predefined
Total:2
(host) # show ids signature-matching-profile factory-default-signatures
IDS Signature Matching Profile "factory-default-signatures" (Predefined)
------------------------------------------------------------------------
Parameter Value
--------- -----
IDS Signature AirJack
IDS Signature ASLEAP
IDS Signature Deauth-Broadcast
IDS Signature Netstumbler Generic
IDS Signature Netstumbler Version 3.3.0x
IDS Signature Null-Probe-Response