Reference Guide

Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide show image version | 859
show image version
Description
Display the current system image version on both partition 0 and 1.
Syntax
No parameters.
Example
The following example shows that the controller is running ArubaOS 3.4 and booting off partition 0:0.
The output of this command includes the following parameters:
Command History
This command was available in ArubaOS 1.0.
Command Information
Parameter Description
Partition Partition number and name. The default boot partition will display a **Default boot** notice
by the partition name.
Software Version Version of ArubaOS software running on the partition.
Build number Build number for the software version.
Label The label parameter can display additional information for the build. By default, this value is
the software build number.
Built on Date the software build was created.
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on local and master
controllers
(host) #show image version
----------------------------------
Partition : 0:0 (/dev/hda1) **Default boot**
Software Version : AOS-W 3.3.2.0
Build number : 18661
Label : 18661
Built on : 2008-06-12 04:24:34 PDT
----------------------------------
Partition : 0:0 (/dev/hda1)
Software Version : AOS-W 3.3.2.0
Build number : 18661
Label : 18661
Built on : 2008-06-12 04:24:34 PDT