Reference Guide

Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide ap authorization-profile | 87
ap authorization-profile
ap authorization-profile <profile>
authorization-group <profile>
Description
This command defines a temporary configuration profile for remote APs that are not yet authorized on the
network.
Syntax
Usage Guidelines
The AP authorization-profile specifies which configuration should be assigned to a remote AP that has been
provisioned but not yet authenticated at the remote site. By default, these yet-unauthorized APs are put into the
temporary AP group authorization-group and assigned the predefined profile NoAuthApGroup. This
configuration allows the user to connect to an unauthorized remote AP via a wired port then enter a corporate
username and password. Once a valid user has authorized the AP and the remote AP will be marked as authorized
on the network. The remote AP will then download the configuration assigned to that AP by it's permanent AP
group.
Example
The following command creates a new authorization profile with a non-default configuration for unauthorized
remote APs:
ap authorization-profile default2
authorization-group NoAuthApGroup2
Command History
Command Information
Parameter Description Range Default
authorization-
profile <profile>
Name of this instance of the profile. The name must be 1-63
characters.
— “default”
authorization-group
<profile>
Name of a configuration profile to be assigned to the group
unauthorized remote APs.
— “NoAuthAp
Group”
Release Modification
ArubaOS 5.0 Command introduced
Platforms Licensing Command Mode
Available on all platforms Base operating system Config mode on master or local controllers