Reference Guide

Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide show mac-address-table | 961
show mac-address-table
show mac-address-table
Description
Displays a MAC forwarding table.
Syntax
No parameters.
Example
Issue this command to display the MAC forwarding table.
The output includes the following parameters:
Command History
This command was introduced in ArubaOS 1.0.
Command Information
Parameter Description
Dynamic Address Count Count of dynamic addresses currently associated with the controller
Static Address (User-
defined) Count
Count of static, user-defined addresses associated with the controller
System Self Address
Count
Number of self system addresses
Total MAC Addresses Total number of MAC addresses associated with the controller
Maximum MAC Addresses Maximum number of MAC addresses
Destination Address Destination MAC address
Address Type Destination address type
VLAN Associated VLAN
Destination Port Destination port
Platforms Licensing Command Mode
All platforms Base operating system Enable or config mode on master controllers
Dynamic Address Count: 0
Static Address (User-defined) Count: 0
System Self Address Count: 0
Total MAC Addresses : 6
Maximum MAC addresses : 6
MAC Address Table
------------------
Destination Address Address Type VLAN Destination Port
------------------- ------------ ---- ----------------
00:0b:86:00:00:00 Mgmt 1 vlan 1