Reference Guide

1042 | show interface fastethernet Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Parameter Description
Name Name of the specified port.
Untrusted Vlan(s) List of untrusted VLANs.
#show interface fastethernet 1/1 xsec
xsec vlan 7 is ACTIVE
The output of this command includes the following parameters:
Parameter Description
xsec vlan 7 is ACTIVE
This states that xsec is active on the specified port as well as the associated VLAN.
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or config mode on master controllers