Reference Guide

1044 | show interface gigabitethernet Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Parameter Description
Encapsulation
Encapsulation method assigned to this port.
loopback...
Displays whether or not loopback is set.
Configured
Configured transfer operation and speed.
Jumpo support...
Jumbo frame support is enabled.
Negotiated
Negotiated transfer operation and speed.
MTU bytes
MTU size of the specified port in bytes.
BW is...
Bandwidth of the link.
Last clearing of “show interface
counters”
Time since “show interface counters” was cleared.
link status last changed...
Time since “show interface counters” was cleared.
Below the time, all current counters related to the specified port are
listed.
This port is...
Whether or not this port is trusted.
POE status of the port is...
The POE status of the specified port.
(host)#show interface gigabitethernet 1/0
Port InOctets InUcastPkts InMcastPkts InBcastPkts
GE1/0 112670646 1137507 907019 4983
Port OutOctets OutUcastPkts OutMcastPkts OutBcastPkts
GE1/0 58342401 170490 104 15373
The output of this command includes the following parameters:
Parameter Description
Port
Port number.
InOctets
Number of octets received through the port.
InUcastPkts
Number of unicast packets received through the port.
InMcastPkts
Number of multicast packets received through the port.
InBcastPkts
Number of broadcast packets received through the port.
OutOctets
Number of octets sent through the port.
OutUcastPkts
Number of unicast packets sent through the port.
OutMcastPkts
Number of multicast packets sent through the port.
OutBcastPkts
Number of broadcast packets sent through the port.
#show interface gigabitethernet 1/0 switchport