Reference Guide

1 10.6.2.252 255.255.255.0 00:0b:86:01:99:00 disabled disabled 10.6.2.252 CP
disabled
66 10.6.6.252 255.255.255.0 00:0b:86:01:99:00 disabled disabled 10.6.6.252 CP
disabled
63 10.6.3.252 255.255.255.0 00:0b:86:01:99:00 disabled disabled 10.6.3.252 CP
disabled
The output of this command includes the following parameters:
Parameter Description
VLAN
A VLAN ID number.
Addr
IP address of a VLAN router.
Netmask
Subnet mask for the IP address.
MAC Address
MAC destination address.
IGMP
Indicates if IGMP is enabled (or disabled) on the interface.
Snooping
Indicates if IGMP snooping is enabled (or disabled).
Querier
IP address of an IGMP querier.
Destination
Traffic destination.
IGMP Proxy
Indicates if IGMP proxy is enabled (or disabled).
The following example displays the current IGMP configuration settings for the controller.
(host) #show ip igmp config
IGMP Config
-----------
Name Value
---- -----
robustness-variable 2
query-interval 125
query-response-interval 100
startup-query-interval 31
startup-query-count 2
last-member-query-interval 10
last-member-query-count 2
version-1-router-present-timeout 400
The output of this command includes the following parameters:
Parameter Description
robustness-variable
This variable is increased from its default level of 2 to allow for expected
packet loss on a subnetwork.
query-interval
Interval, in seconds, at which the controller sends host-query messages to
the multicast group address 224.0.0.1 to solicit group membership
information.
query-response-interval
Maximum time, in .1 second intervals, that can elapse between when the
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show ip igmp | 1073