Reference Guide

show ip mobile
show ip mobile
active-domains
binding [<host-ip>|<host-macaddr>|brief]
domain [<name>]
global
hat
host [<host-ip>|<host-macaddr>|brief]
packet-trace [<count>]
remote <host-ip>|<host-macaddr>
trace <ip-addr>|<mac-addr>|{force <ip-addr>|<mac-addr>}
traffic dropped|foreign-agent|home-agent|proxy|proxy-dhcp
trail <host-ip>|<host-macaddr>
tunnel
visitor [<host-ip>|<host-macaddr>|brief]
Description
Display statistics and configuration information for the mobile protocol.
Syntax
Parameter Description
active domains
IP mobility domains active on this switch
binding
Display a list of Home Agent Bindings
[<host-ip>]
Filter the Home Agent Bindings list to display data for a specific host IP address.
[<host-macaddr>]
Filter the Home Agent Bindings list to display data for a specific host MAC
address.
[brief]
Limit the output of this command to show just two lines of data.
domain [<name>]
Display subnet, VLAN and home agent information for all mobility domains, or
specify a mobility domain name to view data for that domain only.
global
View the current Mobility Agents global configuration
hat
Display the Active Home Agent Table
host
Display a list of Mobile IP hosts.
[<host-ip>]
Filter the Mobile Host List to display data for a specific host IP address.
[<host-macaddr>]
Filter the Mobile Host List to display data for a specific host MAC address.
[brief]
Limit the output of this command to show just two lines of data.
packet-trace [<count>]
The output of this command shows when packets of different types were sent
between a source IPor MAC address and a destination IP or MAC address.
remote <host-ip>|<host-
This is a debug command which can be used to identify the controller asso-
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show ip mobile | 1075