Reference Guide

ManualsBrandsDell ManualsTVs & monitorsW-620

1141

1144 | show log user-debug Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide

show log user-debug

show log user-debug{[<number>][all]}

Description

Show the controller’s user debug logs.

Syntax

Parameter Description

Start displaying the log output from the specified number of lines from the end of the log.

all

Shows all the user debug logs for the controller.

Example

This example shows the controller’s last ten user debug logs.

(host) #show log user-debug 10

Mar 5 13:57:24 :501090: <DBUG> |stm| Probe response: 00:18:f8:ab:77:a4: AP 10.3.49.253-

00:0b:86:a2:e7:40-1.1.1 SSID

Mar 5 13:57:24 :501090: <DBUG> |stm| Probe response: 00:18:f8:ab:77:a4: AP 10.3.49.253-

00:0b:86:a2:e7:41-1.1.1 SSID

Mar 5 13:58:26 :501082: <DBUG> |stm| Probe request: 00:18:f8:ab:77:a4: AP 10.3.49.253-

00:0b:86:a2:e7:40-1.1.1

Mar 5 13:58:26 :501085: <DBUG> |stm| Probe request: 00:18:f8:ab:77:a4: AP 10.3.49.253-

00:0b:86:a2:e7:40-1.1.1 SSID

Mar 5 13:58:26 :501090: <DBUG> |stm| Probe response: 00:18:f8:ab:77:a4: AP 10.3.49.253-

00:0b:86:a2:e7:40-1.1.1 SSID

Mar 5 13:58:26 :501090: <DBUG> |stm| Probe response: 00:18:f8:ab:77:a4: AP 10.3.49.253-

00:0b:86:a2:e7:41-1.1.1 SSID

Mar 5 13:58:27 :501082: <DBUG> |stm| Probe request: 00:18:f8:ab:77:a4: AP 10.3.49.253-

00:0b:86:a2:e7:40-1.1.1

Mar 5 13:58:27 :501085: <DBUG> |stm| Probe request: 00:18:f8:ab:77:a4: AP 10.3.49.253-

00:0b:86:a2:e7:40-1.1.1 SSID

Mar 5 13:58:27 :501090: <DBUG> |stm| Probe response: 00:18:f8:ab:77:a4: AP 10.3.49.253-

00:0b:86:a2:e7:40-1.1.1 SSID

Mar 5 13:58:27 :501090: <DBUG> |stm| Probe response: 00:18:f8:ab:77:a4: AP 10.3.49.253-

00:0b:86:a2:e7:41-1.1.1 SSID

Command History

This command was available in ArubaOS 3.0.

Command Information

Platforms Licensing Command Mode

All platforms Base operating system Available in Enable and Config modes.